Edição atual tal como 07h15min de 21 de dezembro de 2011

[editar] Introdução

Esta página referencia as configurações usadas para a instalação completa dos Servidores utilizado nos Campi da Unioeste.

[editar] Identificação dos servidores

[editar] Configuração

-- SO ubuntu 9.04 (Jaunty)

Tamanho das partições:

[editar] Configuração das Interfaces

Edite o arquivo /etc/network/interfaces

auto lo
iface lo inet loopback
auto eth3
iface eth3 inet static
        address 200.201.88.90
        netmask 255.255.255.0
        network 200.201.88.0
        broadcast 200.201.88.255
        gateway 200.201.88.1

OBS

• Altere os IPs para o seu servidor.

[editar] SSH, SNMP, Sincronização de Data e Hora

Veja item Configurações Comuns ao Servidores

[editar] Configuração do Servidor de Webmin

Pacotes necessários:

• libnet-ssleay-perl
• openssl
• libauthen-pam-perl
• libmd5-perl
• libio-pty-perl
• webmin_1.450

Instalação:

 sudo apt-get install libnet-ssleay-perl openssl libauthen-pam-perl libmd5-perl libio-pty-perl
 sudo wget http://ufpr.dl.sourceforge.net/sourceforge/webadmin/webmin_1.450_all.deb
 sudo dpkg -i webmin_1.450_all.deb

Para acessar https://ip_da_maquina:10000

[editar] Configuração do Servidor de DNS

Pacotes necessários:

• bind9

Instalação:

 sudo apt-get install bind9

Edite o arquivo /etc/bind/named.conf.options

          forwarders {
                200.201.88.60;
                200.201.88.61;
                200.201.0.20;
                200.201.0.25;
                };
          listen-on {
                127.0.0.1;
                200.201.xx.xx;
          };

[editar] Configuração do Servidor de LDAP

Com o Ubuntu 9.04, a maneira como o OpenLDAP é usado e configurado mudou. O OpenLDAP não é mais configurado via slapd.conf, mas pelo diretório slapd.d que contem os arquivos ldiff para configurar o OpenLDAP. Observe que se você precisa adicionar um schema específica ou outra configuração, então você deve seguir o guia de instalação fornecido pela aplicação. Mas utilizaremos uma forma de configuração usando o estilo antigo slapd.conf.

Pacotes necessários:

• slapd
• ldap-utils
• phpldapadmin

Instalação:

A instalação do OpenLDAP é simples:

 sudo apt-get install slapd ldap-utils phpldapadmin

Quando a instalação pedir senha ou outra informação, apenas tecle enter, pois a configuração será feita posteriormente.

Configurando o OpenLDAP

Edite o arquivo /etc/default/slapd

SLAPD_SERVICES="ldap://127.0.0.1:389/ ldaps:///"

Baixe os arquivos de schemas e descompacte no diretório /etc/ldap/schema

Schema.zip

cd /etc/ldap/schema
chown root:root *

Vamos criar os certificados para criptografia

cd /etc/ldap
openssl req -new -x509 -nodes -out slapd-cert.pem -keyout slapd-key.pem -days 999999
chmod 644 slapd-cert.pem
chown openldap:openldap slapd-key.pem
chmod 400 slapd-key.pem

Quanto você executar o comando openssl ele ira fazer uma série de perguntas, responda da seguinte forma:

Country Name (2 letter code) [AU]:BR
State or Province Name (full name) [Some-State]:Parana
Locality Name (eg, city) []:Cascavel
Organization Name (eg, company) [Internet Widgits Pty Ltd]:UNIOESTE
Organizational Unit Name (eg, section) []:DRI
Common Name (eg, YOUR name) []:netsr-xx.unioeste.br
Email Address []:sup_redes@unioeste.br

OBS: No Common Name coloque o nome do servidor que está configurando.

Vá no diretório /etc/ldap/ e crie um arquivo chamado slapd.conf

cd /etc/ldap
sudo vi slapd.conf

Copie e cole o texto abaixo:

# is the main slapd configuration file. See slapd.conf(5) for more
# info on the configuration options.

#######################################################################
# Global Directives:

# Features to permit
allow bind_v2

# Schema and objectClass definitions
include /etc/ldap/schema/core.schema
include /etc/ldap/schema/cosine.schema
include /etc/ldap/schema/nis.schema
include /etc/ldap/schema/inetorgperson.schema
include /etc/ldap/schema/RADIUS-LDAPv3.schema
include /etc/ldap/schema/qmailuser.schema
include /etc/ldap/schema/phpgwcontact.schema
include /etc/ldap/schema/phpgwaccount.schema
include /etc/ldap/schema/samba.schema
include /etc/ldap/schema/amavis.schema
include /etc/ldap/schema/dyngroup.schema
include /etc/ldap/schema/java.schema
include /etc/ldap/schema/openldap.schema
include /etc/ldap/schema/ppolicy.schema

# Where the pid file is put. The init.d script
# will not stop the server if you change this.
pidfile         /var/run/slapd/slapd.pid

# List of arguments that were passed to the server
argsfile        /var/run/slapd/slapd.args

# Read slapd.conf(5) for possible values
loglevel        255

# Where the dynamically loaded modules are stored
modulepath      /usr/lib/ldap
moduleload      back_hdb
moduleload      syncprov

ServerID        '''XXX'''
# se for Reitoria netsr-01 ---> Server ID 	1
# se for Reitoria netsr-02 ---> Server ID 	2
# se for Reitoria netsr-03 ---> Server ID 	3
# se for Reitoria netsr-04 ---> Server ID 	4
# se for Toledo   netsr-10 ---> Server ID 	861
# se for FOZ      netsr-13 ---> Server ID 	841
# se for MARECHAL netsr-12 ---> Server ID 	831
# se for FBE      netsr-11 ---> Server ID 	851
# se for HUOP     netsr-14 ---> Server ID 	821

# The maximum number of entries that is returned for a search operation
sizelimit 500

# The tool-threads parameter sets the actual amount of cpu's that is used
# for indexing.
tool-threads 1

#######################################################################
# Specific Backend Directives for bdb:
# Backend specific directives apply to this backend until another
# 'backend' directive occurs
backend         hdb

#######################################################################
# Specific Backend Directives for 'other':
# Backend specific directives apply to this backend until another
# 'backend' directive occurs
#backend                <other>
database        config
#######################################################################
# Specific Directives for database #1, of type bdb:
# Database specific directives apply to this databasse until another
# 'database' directive occurs
database        hdb

# The base of your directory in database #1
suffix dc=unioeste,dc=br

# rootdn directive for specifying a superuser on the database. This is needed
# for syncrepl.
rootdn "cn=admin,cn=config"
# Where the database file are physically stored for database #1
directory       "/var/lib/ldap"

# For the Debian package we use 2MB as default but be sure to update this
# value if you have plenty of RAM
dbconfig set_cachesize 0 67108864 0

# Sven Hartge reported that he had to set this value incredibly high
# to get slapd running at all. See http://bugs.debian.org/303057
# for more information.

# Number of objects that can be locked at the same time.
dbconfig set_lk_max_objects 1500
# Number of locks (both requested and granted)
dbconfig set_lk_max_locks 1500
# Number of lockers
dbconfig set_lk_max_lockers 1500

# Indexing options for database #1
index           objectClass eq
index           cn,sn           eq,sub,approx
index           uid,uidNumber,gidNumber,memberUid,loginshell    pres,eq

index           sambaSID        eq
index           sambaPrimaryGroupSID    eq
index           sambaDomainName eq
index           phpgwContactOwner pres,eq,sub
index entryCSN eq
index entryUUID eq

# Save the time that the entry gets modified, for database #1
lastmod         on
checkpoint      512 30
# Where to store the replica logs for database #1

TLSCertificateFile     /etc/ldap/slapd-cert.pem
TLSCertificateKeyFile  /etc/ldap/slapd-key.pem
TLSCACertificateFile   /etc/ldap/slapd-cert.pem
rootdn  "cn=manager,dc=unioeste,dc=br"
rootpw '''password'''

#replogfile     /var/lib/ldap/replog

# The userPassword by default can be changed
# by the entry owning it if they are authenticated.
# Others should not be able to see it, except the
# admin entry below
# These access lines apply to database #1 only
access to attrs=userPassword,sambaLMPassword,sambaNTPassword,shadowLastChange
        by dn="cn=manager,dc=unioeste,dc=br" write
        by dn="cn=admin,dc=unioeste,dc=br" write
        by anonymous auth
        by self write
        by * none

# Ensure read access to the base for things like
# supportedSASLMechanisms.  Without this you may
# have problems with SASL not knowing what
# mechanisms are available and the like.
# Note that this is covered by the 'access to *'
# ACL below too but if you change that as people
# are wont to do you'll still need this if you
# want SASL (and possible other things) to work 
# happily.
access to dn.base="" by * read

# The admin dn has full write access, everyone else
# can read everything.
access to *
        by dn="cn=manager,dc=unioeste,dc=br" write
        by dn="cn=admin,dc=unioeste,dc=br" write
        by * read

# For Netscape Roaming support, each user gets a roaming
# profile for which they have write access to
#access to dn=".*,ou=Roaming,o=morsnet"
#        by dn="cn=admin,dc=unioeste,dc=br" write
#        by dnattr=owner write

#######################################################################
# Specific Directives for database #2, of type 'other' (can be bdb too):
# Database specific directives apply to this databasse until another
# 'database' directive occurs
#database        <other>

# The base of your directory for database #2
#suffix         "dc=debian,dc=org"
#
# Cuidado com estes detalhes 
# se for Reitoria netsr-01     -----> rid=10
#			       -----> rid=12
# se for Reitoria netsr-02     -----> rid=11
#			       -----> rid=13
# se for Reitoria netsr-03     -----> rid=16
#			       -----> rid=15
# se for Reitoria netsr-04     -----> rid=17
#			       -----> rid=18
# se for HUOP	  netsr-14     -----> rid=821
#			       -----> rid=822
# se for FBE	  netsr-11     -----> rid=851
#			       -----> rid=852
# se for MCR	  netsr-12     -----> rid=831
#			       -----> rid=832
# se for foz	  netsr-13     -----> rid=841
#			       -----> rid=842
# se for tol	  netsr-10     -----> rid=861
#			       -----> rid=862
	
syncrepl rid='''xxx'''
        provider=ldaps://netsr-01.unioeste.br:636
        type=refreshAndPersist
        retry="60 +"
        searchbase="dc=unioeste,dc=br"
        attrs="*,structuralObjectClass,entryUUID,entryCSN,creatorsName,createTimestamp,modifiersName,modifyTimestamp"
        filter="(ObjectClass=*)"
        scope=sub
        schemachecking=Off
        bindmethod=simple
        binddn="cn=manager,dc=unioeste,dc=br"
        credentials=''password''
syncrepl rid='''xxx''''
        provider=ldaps://netsr-02.unioeste.br:636
        type=refreshAndPersist
        retry="60 +"
        searchbase="dc=unioeste,dc=br"
        attrs="*,structuralObjectClass,entryUUID,entryCSN,creatorsName,createTimestamp,modifiersName,modifyTimestamp"
        filter="(ObjectClass=*)"
        scope=sub
        schemachecking=Off
        bindmethod=simple
        binddn="cn=manager,dc=unioeste,dc=br"
        credentials=''password''
mirrormode      on
overlay syncprov

OBS IMPORTANTES:

• Escolha o ServerID referente a unidade
• Escolha os syncrepl rid referentes a unidade
• Coloque a credentials da replicação corretas
• Coloque a rootpw correta em MD5

Próximo, iremos atualizar as configurações no slapd.d do OpenLDAP.

sudo /etc/init.d/slapd stop

Backup o diretorio slapd.d

sudo cd /etc/ldap
sudo mv slapd.d slapd.d.bck

Agora criamos um novo diretório slapd.d e carregamos a nova configuração baseada no arquivo slapd.conf.

sudo mkdir slapd.d
sudo slaptest -f slapd.conf -F slapd.d

Você deve receber uma mensagem de resposta config file testing succeeded Agora vamos mudar o proprietário do diretório slapd.d e reiniciar o OpenLDAP.

sudo chown -R openldap:openldap slapd.d
sudo /etc/init.d/slapd start

Configurando o phpldapadmin

Edite o arquivo /etc/phpldapadmin/config.php

$ldapservers->SetValue($i,'server','host','ldap://localhost');
$ldapservers->SetValue($i,'server','port','389');

Configurando o libnss

Crie um arquivo /etc/ldap.secret Insira a senha do manager do ldap nele.

Edite o arquivo /etc/ldap/ldap.conf

Exclua todas linhas e cole o texto abaixo:

host 127.0.0.1
base dc=unioeste,dc=br
uri ldap://127.0.0.1
ldap_version 3
binddn cn=admin,dc=unioeste,dc=br
bindpw xxxxxxxx
rootbinddn cn=manager,dc=unioeste,dc=br
pam_password md5
nss_initgroups_ignoreusers Debian-exim,avahi,backup,bin,bind,daemon,dhcpd,freerad,games,gnats,haldaemon,irc,klog,
landscape,libuuid,list,lp,mail,man,messagebus,news,ntp,openldap,polkituser,proxy,root,snmp,sshd,sync,
sys,syslog,uucp,www-data

OBS

• Altere a senha no bindpw

Configurando o nsswitch

Edite o arquivo /etc/nsswitch.conf

# /etc/nsswitch.conf
#
# Example configuration of GNU Name Service Switch functionality.
# If you have the `glibc-doc-reference' and `info' packages installed, try:
# `info libc "Name Service Switch"' for information about this file.
passwd:         compat ldap
group:          compat ldap
shadow:         compat ldap

hosts:          dns files mdns4_minimal [NOTFOUND=return] mdns4 wins
networks:       files dns

protocols:      db files
services:       db files
ethers:         db files
rpc:            db files

netgroup:       nis

[editar] Configuração do SAMBA

Pacotes necessários:

• samba
• samba-client
• smb-ldaptools

Instalação:

sudo apt-get install samba smbclient smbldap-tools

Edite o arquivo /etc/samba/smb.conf

#======================= Global Settings =======================

[global]
	ldap ssl = off
	name resolve order = lmhosts wins bcast
	passwd chat = *Enter\snew\sUNIX\spassword:* %n\n *Retype\snew\sUNIX\spassword:* %n\n *password\supdated\ssuccessfully* .
	idmap gid = 10000 - 20000
	smb ports = 139
        obey pam restrictions = yes
	enable privileges = Yes
	delete user from group script = sudo /usr/sbin/smbldap-groupmod -x "%u" "%g"
	time server = yes 
	passwd program = /usr/bin/passwd %u	
	max disk size = 1000
	dns proxy = no
	netbios name = NET-DMC-XXX  
	server string = Unioeste-xxxxxx Local Server
        idmap uid = 10000 - 20000
	default = netlogon
	local master = yes
	workgroup = UNIOESTE
	debug level = 1 
	os level = 253
	ldap admin dn = cn=manager,dc=unioeste,dc=br
	security = user
	add machine script = sudo /usr/sbin/smbldap-useradd -a -w %u
	delete user script = sudo /usr/sbin/smbldap-userdel "%u"
	max log size = 10000
	log level = 1
	log file = /var/log/samba/log.%m
	load printers = no
	ldap user suffix = ou=Users
	add group script = sudo /usr/sbin/smbldap-groupadd -p "%g"
	socket options = TCP_NODELAY
	add user to group script = sudo /usr/sbin/smbldap-groupmod -m "%u" "%g"
	wins server = 200.201.88.60
	logon drive = 
	interfaces = eth3 
	domain master = no
	local master = yes
	encrypt passwords = yes
	idmap backend = ldap:ldap://localhost
	passdb backend = ldapsam:ldap://localhost 
	logon home = 
	ldap delete dn = no
	server string = Unioeste Master Server
	ldap group suffix = ou=Groups
	ldap machine suffix = ou=Computers
	ldap suffix = dc=unioeste,dc=br
	unix password sync = yes
	logon path = 
	add user script = sudo /usr/sbin/smbldap-useradd -m "%u"
	set primary group script = sudo /usr/sbin/smbldap-usermod -g "%g" "%u"
	syslog = 0
	panic action = /usr/share/samba/panic-action %d
	unix charset = iso-8859-1
	bind interfaces only = true
	domain logons = yes
	preferred master = yes
	
	

#======================= Share Definitions =======================
[netlogon]
   comment = Network Logon Service
   path = /home/samba/netlogon
   guest ok = yes
   writable = no
   share modes = no

OBS IMPORTANTES

• Altere o netbios name e server string

Execute o comando:

smbpasswd -w SenhadoManager

[editar] Configuração do smb-ldaptools

Baixar e descompactar em /etc/smbldap-tools/ os arquivos abaixo:

Smbldap.zip

Altere o arquivo na linha 545

edite /usr/share/perl5/smbldap_tools.pm

                 'objectclass' => ['top', 'person', 'organizationalPerson', 'inetOrgPerson', 'posixAccount'],
                 #'objectclass' => ['top', 'account', 'posixAccount'],
                 'cn'   => "$user",
                 'sn'   => "$user",

[editar] Configuração do FreeRadius

Pacotes necessários:

• Freeradius: Arquivos de instalação Freeradius.zip
• Freeradius: Arquivos de configuração Freeradius.conf.zip

Instalação:

Baixe e descompacte os arquivos de instalação

sudo dpkg -i freeradius_2.1.3-0_i386.deb 
sudo dpkg -i freeradius-ldap_2.1.3-0_i386.deb 
sudo apt-get install build-essential
sudo apt-get install -f

Baixe e descompacte os arquivos de configuração. Copie os arquivos para /etc/freeradius e altere as permissões

sudo cp -r * /etc/freeradius/
sudo chown -R root:freerad /etc/freeradius/*
sudo mkdir /var/run/radiusd

Edite os arquivos /etc/freeradius/certs/ca.cnf server.cnf e client.cnf

Corriga o CommonName para o nome do servidor

Execute o comando para gerar as chaves

sudo cd /etc/freeradius/certs/
sudo ./bootstap

Edite o arquivo /etc/freeradius/radiusd.conf

Corriga a interface.

 interface = eth3

Corriga os ips para o servidor (DEIXAR VAZIO????):

listen{
   ipaddr =

OBS

• São dois locais no arquivo para correção